Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Torqueing of bolts....any bolts

[polarexpress]

Originally Posted by chris.p

Ok then, what would the torque values be for 12 sided titanium nuts for the wheel & sprocket side on a 748 be please.


Chris.

Are you referring to the Corse mag swingarm, Chris?

If so those large 55mm 12-sided nuts aren't made of Ti. They are hard anodized Al-nuts. The eccentric pinch bolts and the cush drive nuts are made of Ti, however.

The torque values are as follows:

- Lefthand sprocket carrier nut: 235 Nm.
- Righthand wheel nut (L/H tread): 295 Nm.

The reason the torque values are significantly higher than the stock ones are due to the much coarser thread on the Corse nuts.

Good luck!