Fuel Hose The fuel hose currently fitted (left in picture) is too big,outside diameter,jammed between frame and belt cover. Local hydraulic/fuel hose supplier recommends hose(right in picture).My thinking was that fuel injection hose has a "weave" in the rubber,the one recommended is plain rubber with a cotton type overbraid,more like carb hose to my eyes.Any advice appreciated :puzzled: |
You want Goodrich stanless braided ones, you do :cool::cool::cool: |
I think mine are like the one on the right. I'll check tonight. Can't you re - route it so it doesn't get trapped? Phil |
The problem is where the hoses pass between the frame and the cambelt cover.It was a pain to remove the tank as there was no movement in the hoses,would be impossible to remove the cambelt covers. Hoses are not original,appear to be a bit too heavy duty.The recommended hose would be a perfect fit,but Im not convinced its "injection hose",last thing I need is a mobile barbeque!. |
I also thought that injection hose always had the braid inside the rubber. Have you tried a car accessory place? They usually have lots of different sizes. Keith |
All times are GMT +1. The time now is 06:39. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK