lock tight can i use the lock tight i have to replace all the bolts on my clutch replacement it is medium strength 428 ? thanks:puzzled: |
Loctite 510 according to the workshop manual ( for the M8 x 1.25 mm bolts fixing the drum ) |
Yep, fine on the bolts holding the drum but dont use any on the little ones holding the springs in. Get back to your revision Andy! |
If you use loctite on a thread does it just make it sticky and less likely to undo or more like varnish making it difficult to undo ? On my ST4 the plastic panels that go along side the seat and up towards the pillion grab handle are difficult to fit using the bolts supplied. I have replaced the bolts with a short piece of allthread screwed into the panel then all I have to do is fit the nut and washer, job done. So far they havent come loose but Im sure they could so I was considering using loctite to set them once and for all. What do you guys think ? |
All times are GMT +1. The time now is 09:59. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK