Wanted: UK Beam deflector for 916-style Headlight My 748 needs a UK deflector plate for the headlight, apparently! I've managed to cut and weld the EU one that was in there, but it's a bit of a mess so really needs replacing. Does anyone have a broken headlight unit they no longer want? Will exchange for beer tokens :D |
Antonye, I took out my EEC one, drew round it and made a template, then cut a new one out of a Coke can to a mirror image. Been through at least 4 MOT's like that...no problems and only cost 50p. I gave the Coke to my boy as I hate the stuff! SORTED!!!!!!!!!! R |
headlight mate i have a uk light with cracked lens no longer needed let me know if you want it. chris |
1 Attachment(s) Hi Chris, I'm only after the deflector. You can disassemble the light: - take the two dome nuts off the back and pull off the metal cover - there are 4 screws holding the projector unit into the casing, undo these - undo the 2 bigger phillips screws and the projector will come apart - inside is a small bent plate held in place with a phillips screw - that's what I need! If you have this, let me know as that's what I'm after... |
light Ok mate will get it in bits saturday and get back to you Chris |
Super, thanks! |
I got a UK reflector a couple of years back from Baines Racing at Silverstone for a couple of quid. |
I've had several over the years FOC from DUK. Quick phone call, job done. |
Do you happen to have a contact number, as I'm going to have to source the very same thing. Turns out my early 916 has been fitted up with EU headlight :( |
Quote:
Ducati UK: 0845 122 2996. |
All times are GMT +1. The time now is 16:40. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK