Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   Technical - Help or Info - NON Motorcycle (/forumdisplay.php?f=196)
-   -   Problems With Slipper Clutch (/showthread.php?t=84039)

Lavras 09-Mar-2011 22:26

Problems With Slipper Clutch
 
I recently bought a Bucci Clutch on ebay

The clutch disks were not the same from the instructions, but since I have some spare clutch disks I used them to obtein the instrutions disks compilations.

The problem is that when starting to move the bike, in a low engine rotation, every thing is fine, but if I rev the engine to 3500 rpm or more, at firts every thing seams fine, but then the bike jumps a lot and squils - makes funny noises - (sometimes it iven stalls) and finally stops the jumps and rolls ok.

I tryed a lot of thing to try to stop this:
- i've sanded the iron disks
- I add another iron disk to obtein a 38mm thick group of disks

but It keaps doing the same.

Every thing else is ok. The slipper clutch is work well when I Reduce gears and while rolling, the clutch is smooth like it sould.

Please try to gide me trough this problem

skidlids 09-Mar-2011 23:14

Is the outer basket in good condition, It could be the drive (Fibre Plates) catching

JHP John 10-Mar-2011 17:31

Bucci slipper clutch
 
Hello Lavras, you need to fit at least 2 new steel dished plates in the clutch pack and also there is a specific measurement required form the last clutch plate to the face of the clutch hub.
Give me a call tomorrow and I will explain what you need to do 02476335300

jhp john


All times are GMT +1. The time now is 11:17.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK