620/800 instrument panels ? Anyone got any more info on this ? Quote:
|
Other than the real solution is to spend out on a FIM unit but still trying various things on my 620 |
Phil, the way I understand it is: if you have to get the clocks replaced (like under warranty etc) you have to take your existing key (red) to be re-programmed to the new clocks. It is worth looking for a set of replacement clocks, to keep as 'spares' for just in case.....?? Otherwise, use the keys with that ignition only, as coded to it:( I could, as usual be totally talking out of my backside tho:lol: C |
The immobiliser function is just a chip on the circuit board. So hows about... just buy some second hand clocks and in the event of smashing them up just swap the internals over. Or just disable the immobilier! |
wanted spare 620 clocks set :o |
Quote:
As an electronics engineer I can tell you now that trying to remove a surface mount ic inevitably ends in tears when using a soldering iron or even one with the right solder bit on it. You need to have the right gear otherwise the heat will kill the ic. Believe me, I've spent lots of effort on this and, as Kev says, the answer is an FIM unit. On my circuit board at least all the indentifying numbers of the ic's have been removed so, even identifying the correct ic is very difficult. I wrote to Marelli and Ducati asking for service info and circuit diagrams but, got no reply at all. |
Quote:
That's about the top & bottom of it. I'm going to try an experiment with my 2 SS bikes insofar as I am going to put the new bikes clocks on the old bike and see what happens. According the to info I have from John Hackett some bikes will run like this, some won't but, it's a lottery. |
twpd... I was thinking of just swapping the whole board rather than trying to take a component off it. I've had mine apart but can't remember if the board just unplugs or is hard wired to something. I'd like to try'n disable the immobiliser but it aint my bike! |
Sorry mate I misread you. Well mine is a plug & play unit - the harness just plugs into it. What I am going to do is rehouse it in a steel box under the seat. |
From what i understand the codeing isnt activated untill yoiu start the bike using the red key. We fitted a new clock to Daves bike after his off and it started with no problems. Butch |
All times are GMT +1. The time now is 17:17. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK