The cable from the ignition switch goes down to a 6-way connector usually just behind the head stock, so one side of the 6-way connector is on the end of the ignition switch (switch side), the mating connector is on the main harness (Harness side) The other wires are for parking lights when the steering lock part of the ignition switch is fully to the left, so those wires aren't required. If you have original clocks (with flashing amber LED) and ECU fitted then you will probably need to salvage the transponder from the key (or keep the key) and mount it in the aeriel that is mounted in the housing around the ignition switch and tuck the lot away under the tank. Either that or get the clocks decoded. I've just spent the last few hours going through Coded Clocks and ECUs on my M620, playing match up. As my race bike and the M620 are about to be fitted with Decoded ECUs that I have just done Checkout the Desmo Due Paddock on Facebook |