Quote:
Originally Posted by YMFB What is the acceptable range ? |
As Rockhopper says you want about 14.5V, trouble is with the 3-phase alternator and rectifier you can loose one phase and still get the volts but not the current capability. so need to check the running volts with the lights on
A 6 cell battery which should be 2.2V per cell when fully charged should read 13.2 volts with no load applied, as soon as the ignition is turned on it will drop slightly, the biggest load is the starter motor so when cranking that the volts are really going to try and drop off and if pulled down to far not only do you get slow cranking of the engine but also week sparks, poor pulsing of the injectors etc and the bike doesn't want to start
Some garages can stll test a batteries condition with a load cell may be worth asking around your local ones