Hmm, the spacers that I have seen have had the "dome" towards the swingarm
Also the end cap is from the right-hand side, and probably had holes drilled either to secure it to the swingarm, or for a pipe clip if there was an under-slung rear caliper...
Spacer goes with tha narrower tapered end inwards, some where on the site there is a picture that I put up of what damage can be done to the bearing and sprocket carrier if fitted the other way
Originally posted by skidlids Spacer goes with tha narrower tapered end inwards, some where on the site there is a picture that I put up of what damage can be done to the bearing and sprocket carrier if fitted the other way
Guess who's dropping wheels out this weekend - I've obviously been lucky!!
Many Thanks,I would have a big box of bits in the garage if it wasnt for the help.Ive run the engine,since putting the bike back together,just to check the wiring etc.Going to be nervous to give it any pain after the exploding engine stories.