Brembo Radial master Cylinder Question

Nattyboy · 18-Aug-2006, 20:45

Just fitted one to my 748 tonight - but how do you boys and girls mount your reservoirs ??

Pictures/ideas welcome !

Cheers
Nat

skidlids · 18-Aug-2006, 21:08

Race reservoir off the top yoke, quick drill and tap job

Nattyboy · 18-Aug-2006, 21:12

When you say race reservoir kev do you mean the brembo screw on jobber ? Will have to get myself a longer length of hose..nothings ever simple is it ??!!

Nat

andyb · 18-Aug-2006, 21:24

What sort of bars do you have.....you could get a plug turned to interference fit in the top end with a threaded hole in its centre to mount a bracket......

Harv748 · 18-Aug-2006, 21:30

Just get some slightly longer brackets made up and position them as they are normally. Also longer hose, available from JHP and new clips make the job spot on.

Below were just temporary, but you get the idea.

antonye · 18-Aug-2006, 21:34

Bling it baby!

Felix · 18-Aug-2006, 21:56

The handwriting is appauling!

andyb · 18-Aug-2006, 22:02

With a touch of class.......

Karl · 18-Aug-2006, 22:15

Diy...

ducv2 · 18-Aug-2006, 22:19

I used original bracket and reservoir, bolted to one of the handlebar clamp bolts (use a longer allan bolt). You will need a longer hose to reach the reservoir

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

18-Aug-2006, 20:45	#1
Nattyboy Registered Forum User Ducati in my Blood Posts: 4,181 Join Date: Dec 2003 Location: Swindon, Wilts Mood: Back down to 3 :>( Brembo Radial master Cylinder Question Just fitted one to my 748 tonight - but how do you boys and girls mount your reservoirs ?? Pictures/ideas welcome ! Cheers Nat Reply

18-Aug-2006, 21:08	#2
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Race reservoir off the top yoke, quick drill and tap job Checkout the Desmo Due Paddock on Facebook Reply

18-Aug-2006, 21:12	#3
Nattyboy Registered Forum User Ducati in my Blood Posts: 4,181 Join Date: Dec 2003 Location: Swindon, Wilts Mood: Back down to 3 :>( When you say race reservoir kev do you mean the brembo screw on jobber ? Will have to get myself a longer length of hose..nothings ever simple is it ??!! Nat Reply

18-Aug-2006, 21:24	#4
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! What sort of bars do you have.....you could get a plug turned to interference fit in the top end with a threaded hole in its centre to mount a bracket...... Reply

18-Aug-2006, 21:56	#7
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? The handwriting is appauling! Reply

18-Aug-2006, 22:19	#10
ducv2 Registered Forum User Mille Posts: 261 Join Date: Jul 2003 Location: Hartlepool Mood: Built for comfort, not speed I used original bracket and reservoir, bolted to one of the handlebar clamp bolts (use a longer allan bolt). You will need a longer hose to reach the reservoir Reply