Guys and gals...at last we have lift off, well nearly
Eventually, the company cutting the templates up for me have come good and delivered as promised.
It only took about 8 weeks!!!!!
Anyway...attached is a piccie giving you an idea of the tool itself.
Still to be added are the bobbins for locating it in the frame. These have been machined by a very talented friend of mine, and provide a pukka fit. They are to be attached to the template via stainless fittings (well, 2 cap head hex bolts) for all you bling bandits!
Unfortunately, he is actually on holiday at the moment for another 10 days or so...but when he returns it will be all guns blazing to get these out to those that showed an interest. We have all of the material and fastners in house that we need...so any further delays should be avoided.
For those of you that may have missed this first time around...I'll post a link up to the original thread if I can figure out how to do it...unless someone can do that for me!!!
I will be sending a U2U to all who have shown interest to date to see if they are still interested.
The deal will be £35 for fully paid up members of the DSC, or £50 for non-members...so it pays to join if you haven't already!
So...watch this space...these will be available very soon