STM EVR Slipper clutch

aide998tt · 28-Oct-2011, 22:33

Hi all,
I brought this slipper clutch last year, am just getting around to fit it to my bike and was watching a video on how to install a slipper clutch, the person fitting the clutch mention about a spacer which comes with the clutch. Ive posted a photo of the clutch i think the spacer is missing. Is there a uk dealer where i can get spare parts or can i use the stock spacer.
Thanks
Aide

antonye · 29-Oct-2011, 01:49

Part # 71310951A "Spacer" from your local Ducati dealer.
It's a different size to the standard spacer.

aide998tt · 08-Nov-2011, 23:34

Thanks for the reply,
I ordered the spacer with new seal, does anyone have a drawing or a link to one which showing where the washer goes and which way around it goes.
Cheers.

khu996 · 08-Nov-2011, 23:57

Not sure if this will help:

skidlids · 09-Nov-2011, 00:19

Part No. 8 in the attached pic, do they still cost round £32

smilo006 · 09-Nov-2011, 10:57

also make sure you grease the ball bearings on the ramp. I know someone who mangled their clutch when these jammed.

aide998tt · 09-Nov-2011, 23:00

Thanks for the replys guys.
I received the spacer today with some oil seals, does anyone know which way round the dished washer goes (no.10 on skidlids diagram), the one which goes on after the spacer. Would you guys say i need nos. 10 & 11 washers aswell as i dont have them. The nut i have does fit nicely inside the spider spring though.
Skidlids the spacer was £19.40........
Cheers.

skidlids · 10-Nov-2011, 20:47

On most of my slipper clutches parts 10, 11 & 12 are all a one piece nut come spider spring locator. The Dished washer that goes between the spacer and the centre clutch hub I insert so that its the same as looking into a bowl

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

08-Nov-2011, 23:34	#3
aide998tt Registered Forum User Montjuic Posts: 78 Join Date: Mar 2009 Thanks for the reply, I ordered the spacer with new seal, does anyone have a drawing or a link to one which showing where the washer goes and which way around it goes. Cheers. Reply

09-Nov-2011, 10:57	#6
smilo006 Registered Forum User 500SD Bikes: CBR 600F2-(Ishikawa), Blade RRS-(Baba San), 996s-(Tambo), 996R-(Tambo), MV f1000 312-Tambo Posts: 704 Join Date: Feb 2004 Location: Denmark - UK Mood: I like my bike also make sure you grease the ball bearings on the ramp. I know someone who mangled their clutch when these jammed. Reply

10-Nov-2011, 20:47	#8
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club On most of my slipper clutches parts 10, 11 & 12 are all a one piece nut come spider spring locator. The Dished washer that goes between the spacer and the centre clutch hub I insert so that its the same as looking into a bowl Checkout the Desmo Due Paddock on Facebook Reply