Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
Old 26-Oct-2005, 14:37   #1
aka.eric aka.eric is offline
Registered Forum User
500SD
 
Posts: 651
Join Date: Jul 2004
Mirror Glass
How do you remove the glass from the mirrors?
Reply
Old 26-Oct-2005, 15:45   #2
philthy philthy is offline
Registered Forum User
Big Twin
philthy's Avatar
 
Posts: 1,028
Join Date: Jun 2005
Location: Wirral
Mood: Can't make me mind up
Easy, just do what I did-

Clip the shed door as you pull the bike out
Reply
Old 26-Oct-2005, 15:45   #3
851neil 851neil is offline
Registered Forum User
500SD
 
Posts: 698
Join Date: Mar 2005
Location: Bishop Auckland
Mood: need a bike...
well a hammer would work
Reply
Old 26-Oct-2005, 16:45   #4
aka.eric aka.eric is offline
Registered Forum User
500SD
 
Posts: 651
Join Date: Jul 2004
Ha bloody ha,bodywork due to go to painters,and I cant see how the glass can be removed,no screw like the 748/9.. mirrors.Any serious offers appreciated.
Reply
Old 26-Oct-2005, 17:04   #5
Derek Derek is offline
Registered Forum User
GTL
Bikes: ST4s ABS
Derek's Avatar
 
Posts: 480
Join Date: Aug 2003
Location: Tayside, Scotland
Are these the same as the carby 900ss mirrors?
If so they are glued in with couple of blobs of putty like stuff. Bit like a sticky mastic. One of mine used to detach itself at the outside edge when the weather got cold.
You could heat up the glass with a hair dryer and slip a bit of wire with a right angle bend at the end of it between the glass and the plastic housing. By rotating the wire so that it catches you might then be able to separate the mirror from the glue.
Can't you just mask off the glass? It would be a lot safer than breaking the glass.
Reply
Old 26-Oct-2005, 20:48   #6
851neil 851neil is offline
Registered Forum User
500SD
 
Posts: 698
Join Date: Mar 2005
Location: Bishop Auckland
Mood: need a bike...
yup, mask em - that's what my painters did when I had my bodywork re-sprayed.
Reply
Old 27-Oct-2005, 06:26   #7
loony888 loony888 is offline
Registered Forum User
Mille
 
Posts: 382
Join Date: Sep 2005
Location: brisbane australia
Mood: sensational!!
when you mask them, sometimes, when removing the tape it seperates the silver on the back from the glass causing that ugly crinkled looking edge, my painter smeared the glass with vaseline and then when they were done just wiped it and the paint overspray off.
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 05:49.