A tyre can be cleaned down with a spray can of brake cleaner - I've used it before when I've had a tyre with manufacturing contaminants on it. Just enough solvent to do the job + a bit of elbow 'grease' = result.
Good tip, I'll give the brake cleaner a go. I have to say I didn't expect to be sliding the Ducati quite so quickly :-). I'll try and get there about 11.00am.
Is there any chance you guys could hang on a bit later? I'm not sure i'll make it by 2pm although i'll try. I took my forks off and gave them to Maxton at Snetterton BSB about the stiction problem (see previousthread...) Basically they're 42mm forks but some monkey had fitted 41mm seals and dust shields. They're doing a rebuild and i'm having stiffer springs fitted too. The springs won't be here till Friday and they'll build the forks then. I work nights so i'll be going to work Friday night, waiting for the forks to arrive on a 9am delivery Saturday morning, building the bike up then leaving (with no sleep, that's dedication for you.) But i'll probably not be there till the afternoon. I'll be gutted if you've all ******ed off *sniff*
I am currently P155ed off!!My banjo breaklight switch failed on Sunday,ordered a new one at 9am Monday morning direct from Goodridge and it still hasn't arrived!!I sent the old one to them on Tuesday and they got it yesterday).I told them it was urgent,yet still not here.If it doesn't arrive tomorrow,i won't be coming!!I am so,so ANGRY!!!!