Wheels?

domski · 22-Jan-2005, 21:04

In the rules it says "Wheels to be standard Ducati production 17" diameter 3.5" front and 4.5" rear."

Does this include ANY wheels fitted to ANY Production Ducati, as long as they are 17" diameter 3.5" front and 4.5" rear?

Ta

ChrisBushell · 23-Jan-2005, 14:09

Dont forget the std bit, that means no lightweight magnesium ones, etc

Chris

lizzie · 23-Jan-2005, 19:58

I think you might be looking at the first draft of the rules. The final version say "wheels including diameter and rim must remain as originally produced by Ducati since 1992 for the 600/620 bikes".

skidlids · 23-Jan-2005, 20:00

Certainly does make fitting a single sided arm rather difficult

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

22-Jan-2005, 21:04	#1
domski DSC Club Member WSB Hero Posts: 9,994 Join Date: Jan 2005 Location: Devon Wheels? In the rules it says "Wheels to be standard Ducati production 17" diameter 3.5" front and 4.5" rear." Does this include ANY wheels fitted to ANY Production Ducati, as long as they are 17" diameter 3.5" front and 4.5" rear? Ta Reply

23-Jan-2005, 14:09	#2
ChrisBushell DSC Club Member Big Twin Posts: 1,600 Join Date: Oct 2004 Location: Sevenoaks Mood: Im Going to Italy soon! Dont forget the std bit, that means no lightweight magnesium ones, etc Chris Reply

23-Jan-2005, 19:58	#3
lizzie Registered Forum User 500SD Posts: 710 Join Date: Aug 2002 Location: Tunbridge Wells, Kent Mood: Pretty good considering.... I think you might be looking at the first draft of the rules. The final version say "wheels including diameter and rim must remain as originally produced by Ducati since 1992 for the 600/620 bikes". Reply

23-Jan-2005, 20:00	#4
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Certainly does make fitting a single sided arm rather difficult Reply