Rear/Front wheel nut size

flanagaj · 07-Oct-2005, 20:11

Can anyone tell me what size sockets I need to buy to remove the front axle and rear wheel nut on my 748. Sorry but I do not have a vernier gauge and I am not sure if they come in the tool kit.

Thanks

Juckky

nelly · 07-Oct-2005, 21:58

28mm will do the front one and 46mm for the rear. Nothing in the tool kit i'm afraid.

flanagaj · 07-Oct-2005, 22:34

Thanks for your help :-)

skidlids · 07-Oct-2005, 23:16

And if you ever want to do the sprocket side (replacing cush drives or fitting a Renthal/Talon carrier) then a 41mm socket is required.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

07-Oct-2005, 20:11	#1
flanagaj Registered Forum User Mille Posts: 115 Join Date: Oct 2005 Location: Blandford, Dorset Rear/Front wheel nut size Can anyone tell me what size sockets I need to buy to remove the front axle and rear wheel nut on my 748. Sorry but I do not have a vernier gauge and I am not sure if they come in the tool kit. Thanks Juckky Reply

07-Oct-2005, 21:58	#2
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) 28mm will do the front one and 46mm for the rear. Nothing in the tool kit i'm afraid. Reply

07-Oct-2005, 22:34	#3
flanagaj Registered Forum User Mille Posts: 115 Join Date: Oct 2005 Location: Blandford, Dorset Thanks for your help :-) Reply

07-Oct-2005, 23:16	#4
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club And if you ever want to do the sprocket side (replacing cush drives or fitting a Renthal/Talon carrier) then a 41mm socket is required. Reply