Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Indicators and tail tidies

[loverobot]

What is everyone using as re the above?

I have standard allround on my 2001 748s

Seen the evoluzione tail tidy and that looks nice
What good quality small black indicators can people recommend front and back and what other mods will I need to make tham fit?

What size plate will the tail tidy take and can any1 suggest a plate maker?

Thanks in advance

[Guido]

Loverobot,

I have the Evoluzione hanger on my 748R together with the Kellerman indicators front and rear. The indicator hanger is from Ducatished who used to sell on Ebay.

Tidies the rear end up and front end lines a treat and gets rid of those bulbous OEM indicators.

[loverobot]

Did the indicators fit on the front without modification?

Also in your pic the plate is hanging right below the pipes? I must admit I thought the plate 'holder' and indys were attached at the same position??

[m1keyp]

Kellermann Micro 1000 indicators.

They are "E" marked and therefore legal and tiny and gorgeous

Visit this guy http://www.carbonworld.de/shop/ he ships in no time from Germany.

You may need the resistors to slow the flash rate down, my 748 did my mates 998 didn't.

[Carbon749]

Indicators are so over rated ...... store them in the bin

[Guido]

Originally posted by loverobot
Did the indicators fit on the front without modification?

Also in your pic the plate is hanging right below the pipes? I must admit I thought the plate 'holder' and indys were attached at the same position??

Yes the front indies fit straight on the airtubes in place of the OEM items.

There are mounts on the Evoluzione hanger (see attachment below) for the indies but I preferred the 'up out of the way' look of the carbon reflector hanger

[Guido]

Here's the front Kellermans in place

[deej]

guy

did you get those front disks off the guys on ebay or are they genuine braking disks

cheers

deej


p.s. motrax do a copy of those micro cators and j&s do them even cheaper,one of their staff was telling me that they found out who made the motrax stuff abd have noiw repackaged it under a j&s label. £39.99 for motrax or £19.99 for the J&s set. got to be worth a look

[Guido]

Originally posted by deej
guy

did you get those front disks off the guys on ebay or are they genuine braking disks

HI Deej,

Yup, these are the genuine Braking ones. Got them from Talon Engineering, the UK distributor for Braking.

[loverobot]

they are absolutely tiny! they do look very good though

When you say re fitting a resistor how do you mean and where in language a technically incompetent person can understand?