need some advise - just spent saturday fitting up the basic termis so that I can get the bike into the dealer for its first service and let them check alls ok with the set-up...only prob is is that the bike will not turn over.....reset to uk.....reset the electronic code......still no joy.
Any of you guys had similar prob - I'm wondering if I've dislodged something though I can't see anything obvious.......
Sounds like its not reading the key.... Is it turning over..... Or is it dead..... You can try a system reset and try program the key..... Daft one but make sure the kill switch is off !!...... If none of above....Pass
thanks for the reply - engine is not turning over and no voltage drop so suggesting an imobilised condition. I had altready had same thoughts as you and checked all of these inc the electronic reset - in addition have check for the obvious dislodged connectors side stand etc ....given up now - bike is being picked up by the dealer Wed - they suspect dicky ECU.
Good thing is at least I am starting to feel like a real ducati owner ha!ha!