Afternoon all,Ive gone ahead and replaced the grey swingarm for the black boxtype version and all was going well until I came to putting the wheel back in and basically I'm stumped..
I believe all the spacers and the rear brake bracket are a straight forward swap!!!!so why won't it go in??? Any thoughts or suggestions would be a great help so I can get out on it
Not done the conversion myself,but the wheel is a pretty tight fit in the later swingarm.You have'nt got a spacer the wrong way round,or summat dumb,have you?
itll be down to your alignment of the calliper mount bracket. As you say all the spacers are the same, its just a knack of lining up the rear calliper to accept the disc and move to the right place......
thanks for the replys guys,I've been at it again tonight to no provail :-( can someone at some point have look and see if the spacer on the disc side goes flush within the wheel or slightly protruding out as this maybe what's stopping the bracket!!!!
17-Mar-2009, 20:51 
Hybrid Mode
