Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Steering Damper Bearing!

[rcgbob44]

Does anyone out there know where I can buy an "offset spherical rod end bearing" like wots fitted to the dampers on 749/999 dukes.

Any advice would be appreciated b4 I try and e mail Mr Ohlins

[stu 748]

cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ?

[stu 748]

cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ?
regards
stu

[Jon]

Give Ktech or Kais Ohlins a bell.

[Iconic944ss]

Just take it all along to a local bearing stockist (Industrial or otherwise or possibly a Fastners stockist). They sell all sorts of good stuff in there these days as they have such diverse markets to try and satisfy!

[rcgbob44]

not quite as easy as that Frank, if you look at the damper rod on a 749/999 you will see that where it bolts to one of the two mounting points , it is offset, not straifgt as on a 916 series duke.
Spose i hadbetter contac Ohlins.