Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Brembo pad removal.

[i porter]

Hello again thicko here. Can someone explain how to remove the 4 pads from the brembo front calliper.

I see the clip and a pin that goes through. Is it just the case of removing the pin and the clip then the pads will come out.

Or have I to do something else. Thankyou.

[Chrisiball]

Push the wire clip in and pull the pin that slide thru from the side out! Might need pliers to pull it out!

[i porter]

Thanks Chris Ill have a go.

[raykay748R]

Don't forget a wiggle side to side to push piston back a little in order to pull out the pad, by that I mean the pad wiggles, not you!!!!!