748/9** Alloy rear subframe This has been professionaly converted to go straight on a Biposto so the ECU will fit straight on (there is a cross member in the way normally as the loom is too short). The modifcation consists of a CNC machined bracket at the front and some additional bracketry at the rear. All relevant points are threaded. A really tidy looking unit. One of the best ways to save weight from your bike. A standard Biposto subframe weighs3.4 kgs, this one wighs just 1.6kgs ! More pics available (including the frame in situ on the bike). £195 |