Private Adverts Use this forum for all private adverts. You must have been a registered member on this board for at least 14 days before you are allowed to post.
Wanted: 853 pistons, barrels, EPROM chip and any other parts useful to me in converting my 748. SP or SPS cams and slipper clutch also required. Thx. Keith: 07788 864025
I was planing on converting my 748sps engine to a 853,in the end i went with a 955 engine.I collected everything apart from the 853 kit,i sold the engine to Baines Racing at Silverstone,as far as i know they still have it,might get your cams there.I still have a set of heads with bigger valves overhauled with new valaves and shimmed ready to go,i also have a set of light weight adjustable cam pulleys. During my research into converting the 748 i was advised to fit a oil cooler as the 853 engine can run a little hot,i might have a oil cooler to.
My advice is speak to Chris at CJS racing. He built my 853R about 4 years ago and its still going like a goodun. It made 133bhp at the wheel. He knows his stuff when it comes to putting desmos together properly!!
My advice is speak to Chris at CJS racing. He built my 853R about 4 years ago and its still going like a goodun. It made 133bhp at the wheel. He knows his stuff when it comes to putting desmos together properly!!
03-Jan-2011, 15:50 
Thanks 
Linear Mode
