Best paddock stands

Jasper · 31-May-2004, 13:29

Whats the consensus on the best front and rear paddock stands?Go for cups or cotton reels?

Rob B · 31-May-2004, 14:02

Harris for me.

Rgds,

Rob

skidlids · 31-May-2004, 14:53

Harris or Micron

Nattyboy · 01-Jun-2004, 01:46

Deffo use the cotton reel type for the rear. I use the FG Racing one from ducati performance..top quality and lightweight. I have some brand spankers still in there wrapping without attachments...you can have one for £40 (half price) if you can get some ends knocked up (should be easy/cheap enough).

Heres mine attached, but the latest versions are gunmetal in colour.

Cheers
Nat

skidlids · 01-Jun-2004, 03:54

Natt I could be interested in one if it will fit my ZXR400, once I'm back from the TT I will see if you have any still available.

Kev

Nattyboy · 01-Jun-2004, 09:57

Hi Kev

No probs...BTW..each stand has a plaque with an individual serial number, and it also has the website and e-mail for FG..I am told you can get spares from there..

Cheers
Nat

KeefyB · 03-Jun-2004, 10:19

The cups or forks from a Motrax rear paddock stand fit the FG stands perfectly.

Jasper · 03-Jun-2004, 10:36

Cheers,sorted.

Nattyboy · 03-Jun-2004, 18:01

Cheers Keefy...will be easier to get some ends from them than FG in Italy I guess. Jaspers all sorted ... I must be getting generous in my old age as ive lobbed him the attachements off my FG stand (mind you I did get a spangly new wave rear disc in return !!!)

Cheers
Nat

Rob B · 07-Jun-2004, 13:30

What do we all think about the best front lifts/stands? I have a cheap (Demon Tweeks) front stand. It's the type with the pins that go up the bottom of the fork legs. It's a bit awkward to use and I really don't like the fact that it's not well located when I am trying to lever the front end up into the air. I often get one of the pins popping out from the fork bottom as the yoke twists on the way up which seems like a good route to a bill for body work.

Got any recomendations?

Thanks,

Rob

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-May-2004, 13:29	#1
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Best paddock stands Whats the consensus on the best front and rear paddock stands?Go for cups or cotton reels? Reply

31-May-2004, 14:02	#2
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Harris for me. Rgds, Rob Reply

31-May-2004, 14:53	#3
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Harris or Micron Reply

01-Jun-2004, 03:54	#5
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Natt I could be interested in one if it will fit my ZXR400, once I'm back from the TT I will see if you have any still available. Kev Reply

01-Jun-2004, 09:57	#6
Nattyboy Registered Forum User Ducati in my Blood Posts: 4,181 Join Date: Dec 2003 Location: Swindon, Wilts Mood: Back down to 3 :>( Hi Kev No probs...BTW..each stand has a plaque with an individual serial number, and it also has the website and e-mail for FG..I am told you can get spares from there.. Cheers Nat Reply

03-Jun-2004, 10:19	#7
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... The cups or forks from a Motrax rear paddock stand fit the FG stands perfectly. Reply

03-Jun-2004, 10:36	#8
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Cheers,sorted. Reply