Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > speedo

[Bionicle]

How simple\difficult is it to replace a speedo on a 748?

[aka.eric]

Very easy,did mine on my own by myself,with a little help from Haynes.

[Bionicle]

Any points i should be aware of, i cant get a haynes manual here in Denmark, neep to swap out my MPH one for a KPH one

[aka.eric]

Nothing difficult,remove upper fairing,manual says remove instrument cluster but speedo head can be removed on its own,unscrew cable,unscrew retaining screw in trip reset knob,pull out bulb holders,undo retaining nuts and lift away.

[Bionicle]

Thanks

[Goofy_DK]

Where you from!
Hvor i DK bor du!

[Bionicle]

Hej Goofy_DK

Jeg bor i Sønderjylland mellem Kolding og Tonder.

Where abouts are you located?

But my Danish sucks

[Edited on 20-3-2005 by Bionicle]

[Goofy_DK]

Originally posted by Bionicle
Hej Goofy_DK

Jeg bor i Sønderjylland mellem Kolding og Tonder.

Where abouts are you located?

But my Danish sucks

[Edited on 20-3-2005 by Bionicle]

Odense=HC Andersen
Du taler godt dansk, hvis du er en engelsmand?
(you speak good danish if you are a brite)

See you on the road (maybe)

[m1keyp]

to get the book

http://www.amazon.co.uk/exec/obidos/...205792-8982806

[Bionicle]

@m1keyp thanks alot.

@Goofy_DK

Ah your not too far away then only Fyn. and yep i am a Brit, my spoken Danish is passable, my written is non existant reading, i get there
Let me know if you want to meet up one weekend and i will pop over weather depending