Quote:
Originally Posted by djb Thinking Lithium Ion 8000 with polishing kit / brushes etc - right choice? |
I cannot give advice on what dremmel to buy, send a link maybe.
I use Nouvag stuff, it's Dental equipment and OTT for you and at £2k is a bit steep as well for 1 job.
Those silicon impregnated burrs will not grind through stuff, you have to be fairly determined to do that with them.
Scotchbrite wheels are fine, thats what you can use to get that grained finish on say a Rolex bracelet.
I'll put up some other links for you, some of them are bigger and designed more for static polishing machines, but could be modified to say be used in a drill.
http://www.cousinsuk.com/default.asp...oductid=458739 http://www.cousinsuk.com/default.asp...oductid=456251 http://www.cousinsuk.com/default.asp...oductid=456215 http://www.cousinsuk.com/default.asp...oductid=456163 http://www.cousinsuk.com/default.asp...oductid=456157 http://www.cousinsuk.com/default.asp...oductid=456144 http://www.cousinsuk.com/default.asp...oductid=456129 http://www.cousinsuk.com/default.asp...oductid=456087 Any of the above could be used, that is only touching the surface as it were, they will do different sizes, grades etc but will give you a brief insight to what may be out there for the job.