The Dzus fasteners on my 748 were quite dull so I bought a set from eBay but they are much bigger and don't look right. The seller has offered me a refund, so no real probs. I've now managed to polish up all but 2 of the originals which were too oxidised to save.
So I now need to buy 2 fasteners of the smaller type - where can I get some please?
Several places, prices depend on material and whether they are original Dzus etc.
Pro-bolt actually do some titanium ones at £12 each if you're wealthy. I got some chrome plated ones from Preformace Motorcycle Parts that did the job. Came with nylon washers and the clip part too in a pack of 8 for £12. Fast delivery, I'd use them again. I tihnk they were available in Cad plate too for the original look.
Hard to tell from your photo. The ones I got from PMP had a screwdriver slot in the middle. They look fine, depends on how particular you are about it.
The original ones used on the ducatis are the best fit in my opinion. Any good ducati dealer should have some Normally about £5 each . Not expensive if you only need a couple, but seems well pricey when you need to replace all of them.
Originally posted by HW Several places, prices depend on material and whether they are original Dzus etc. pro bolt dzus fasteners are too expensive , have excessive amount of cutting chatter and are not indexed as are the original ones , so look very untidy as the' handles' point all over the place I sent mine back!!! Pro-bolt actually do some titanium ones at £12 each if you're wealthy. I got some chrome plated ones from Preformace Motorcycle Parts that did the job. Came with nylon washers and the clip part too in a pack of 8 for £12. Fast delivery, I'd use them again. I tihnk they were available in Cad plate too for the original look.
Try these http://www.norton-sp.com/ I bought a set from them recently and was very pleased. They often sell stuff on Fleebay UK so ship to England. They can even do 24ct Gold Dzus if you can afford it