recomended settings from hand book for 600SS Hydraulic brake adjustment during rebound and comppression;spring preload- turning the adjuster(the screw at the bottom of the shock)it is posible to modify the hydraulic braking of the damper during the rebound phase. Recomended calibration;from the completely closed position(clockwise),loosen the screw by a total of 6 clicks the knob on the reservoir will adjust the hydraulic damper during the compression phase from the completely closed position (again clockwise) loosen the knob by 25 clicks the preload set by modifying the ring nuts 14 mm of thread showing
i am resurrecting this thread after i was nearly pitched off the thing last night the front is very very bouncy over bumps and ripples - do they all do that sir? cheers