After warming up the bike (749s) the idle is really lumpy and will quite often cut out at the lights or junctions. Is there anything that I could do to fix this or is it a visit to the workshop?
Mr mm,you could try and turn the tickover up a bit,There is a large gromet on the left hand side airbox, Pull the gromet out and turn the screw clockwise.
Murray, I had a similar problem with my 999 last Summer, but only at junctions whilst still in gear/clutch in, put it on the paddock stand and put it in gear, clutch in, and there was still some drive unless the adjuster on the clutch lever was turned right out (longest span), ended up being a tiny bit of air in the clutch fluid, never been a problem since, so might be worth a try.
I think mine is a fueling prob.It also sounds like its only firing on one cylinder when blipping the throttle.It may be the throttle bodies want balancing.Dunno 'til I get it booked in.