The Dreaded EOBD light is on! About a week ago, my Datatool System 3 started alarming almost as soon as the alram was set. I established that it was the movement sensor that was triggering it. Short term solution was to override the movement detector (pressing the oval button after the alarm armed). The plan was to get it fixed during my forthcoming service. However, today other symptoms have appeared. Following my ride back from Moto Italia's open day (in the rain!) the following occured: Having removed the ignition key, the LCD and warning lights stay on (just as though the key was in the ignition). On arming the alarm, the tacho needle is 'twitching' on the 0 rpm mark. The EOBD light is now on and the following error codes are displayed: 37.3 - Immobiliser - serial\cable disconnected 38.0 - ?? This stuff is bad enough at any time but I've a long weekend to France planned for next weekend (departing Derby Thursday afternoon). Any thoughts on how best to resolve this in the limited time available? The bike is still under warranty - is there any obligation on Ducati to provide me with a bike so that I dont have to cancel my trip? Thanks guys |