Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Silencer reducers

[desmojen]

Originally posted by Mr_S
These arrived today.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...1212 825&rd=1

Out of the package



In the can



The fit in the can is very tight, almost an interference fit, and I had to clean out some of the carbon / soot to get them in.

As with the others they do need a hole drilled for the retaining bolt, but I have to say the construction quality is excellent.

A quick test at 3/4 redline brings the noise below 95dB (without I'm reading 118db!!!!) at 1m(ish). Should save me lugging standard cans to trackdays at Castle Combe and Goodwood now...

Total cost under £35 (51 euro's) delivered in a couple of days.

Just to clarify, you do have 50mm end cans, yes?

[Mr_S]

No 45's. Can't justify the extra 5mm for naff all powergain. (only 3bhp on the dyno for my bike)

E-mail the seller for 50's

[Jon]

Originally posted by jpmercer
Anyone do these for triple nines?

No sorry JP, they only do them for proper race bikes:P