Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Supersports: SS / SuperSport / Supersport 950 > Ducati/datatool alarm

[Douglas]

Hello

I am trying to fit a Ducati (Datatool Evo plus) alarm to my 600ss. I think that is the alarm fitted by Ducati.

Does anyone have any instalation infortmation. I have identified how it plugs into the bike loom, but wonder about the various flying leads. I assume one plugs into each front indicator. What do the others plug into?

Any snipperts of info welcome!

Thanks

Douglas

[weeveetwin]

...and to each rear indicator! Also, one goes to the little flashing red warning light fitted 'tween the clocks.

(Mine's just thrown a 'wobbly' so I'll be delving deeper into its workings at the weekend).

[Douglas]

Any poiners as to which wires connect to the rear indicators and the LED?

[Rushjob]

This is from my Veto Evo destructions from my ST2....

Left hand indicator & one alarm earth ( two wires 2.8mm spade terminals,1 purple tagged ) to the left hand indicator on the bike - the purple tagged one to the white/black wire on the bike, the alarm black wire to black on the bike.

Right hand indicator ( 2.8mm spade terminal, 1 purple tagged on its own ) to the right hand indicator on the bike - the purple tagged one to the white/green wire on the bike.

2 green tagged wires - programming / accessory loop
1 yellow/green tagged wire - accessory siren / pager.

If you need a copy of the instructions... drop me a line.

HTH

Cheers

Andy

Alarm LED - identified by bullet connectors - connect to the led as appropriate.

Power wire - 6mm ring terminal - to positive terminal on battery.

[Edited on 31-8-2005 by Rushjob]

[Rushjob]

None go to the rear indicators on the ST - it doesn't matter anyway whether you hook in to the front or rear as the front & rear indicators are already connected in the bike wiring loom!

[Douglas]

Thanks for the help. Unfortunately I wasnt able to work it out with sufficient confidence to wire it up to the bike.

However I have just got a copy of the alarm fitting instructions from Datatool. So if they are successful, I will report back!

[Douglas]

Hullo. I have now successfully fitted the alarm, and it works fine. It was fairly straightforward. So if anyone needs a acopy of the instructions, please feel free to get in touch.

Regards

douglas