SP2 Gear Change Problem Need some advice - on the last two rides now, my SP2 has been very reluctant to change down gears, making the 140 mile round trip to work a little difficult. I removed the foot change, cleaned it up, greased it, refitted, but this didn't seem to make much difference. There is no problem on the upshift,as the return spring is strong, but on the down shift, the return spring does not seem anywhere near as good so the lever is not returning to the correct position, therefore making it almost impossible to change down any more. Pulling off in 2nd, and even 3rd gear is no fun, I can tell you ! Any ideas from you technical guru's ? |