Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Sidestand cutout switch

[roy996]

If you want to overcome the annoying engine cutout when the sidestand is down on you bike take a look here
http://search.ebay.co.uk/_W0QQsassZroy996
or email Roy996@ntlworld.com

[AK]

Spareshack, approx £20 & also take off any discount he may give you too

C

[Ian_km]

Originally posted by CK and AK
Spareshack, approx £20 & also take off any discount he may give you too

C

Where are Spareshack?? seems like a very good idea!

[AK]

West Drayton,
link from UKMOC with phone no etc:

http://www.ukmonster.co.uk/html/sponsor.php

[antonye]

OR

Less than £2 for the parts and do it yourself:

http://ducatisportingclub.com/xmb/vi....php?tid=11072

[AK]

Originally posted by antonye
OR

Less than £2 for the parts and do it yourself:

which is what we did

C
(but not needed to be done on my current bike )

[roy996]

If anybody can make these up for less that £2.00 please let me know as I will buy them from you!!

It takes me over an hour to make these up as I solder all the connections and insert a diode in the main fed wire. (It does not work witrhout it) They come with fitting instructions are fully guaranteed and are sent out next day recorded delivery. I produce quality products but If anybody out there thinks I am overcharging then by all means contact me and make me an offer. I just think this is a good idea and want other Ducati owners to be able to share this "Hassle saving" mod.

Roy

[antonye]

Didn't say you were overcharging - I would have to charge much more than £20 if I were to do this myself to cover things like parts, time, research, packaging etc!

Just pointing out that if you can be arsed to do it yourself, all the parts (including a 5p diode) can be purchased very cheaply - the rest is knowledge and time.

[Totto]

Must say i have actually bought one from roy996
& was very pleased with it as well as the fast service !