Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 19-Mar-2006, 10:42
flanagaj flanagaj is offline
Registered Forum User
Mille
 
Posts: 115
Join Date: Oct 2005
Induction kit / trumpet sock / foam panel ?

I have just been looking on the demon tweeks web site for a replacement air filter for my 748. It listed the above Pipercross filters ranging in price from £20 - £100. Should I just go for the £20 or would the others be better ?
Quote+Reply
  #2  
Old 19-Mar-2006, 11:05
keefer's Avatar
keefer keefer is offline
Registered Forum User
Ducati Meccanica
 
Posts: 2,518
Join Date: Jul 2004
Mood: Found a CR250. Let the bone braking begin
the £20 one is best IMO
you will need runers in your air tubes though
Quote+Reply
  #3  
Old 19-Mar-2006, 11:36
flanagaj flanagaj is offline
Registered Forum User
Mille
 
Posts: 115
Join Date: Oct 2005
Quote:
Originally posted by keefer
the £20 one is best IMO
you will need runers in your air tubes though

Excuse my ignorance, but what are runners ?
Quote+Reply
  #4  
Old 19-Mar-2006, 12:00
Chrisiball Chrisiball is offline
Registered Forum User
500SD
 
Posts: 529
Join Date: May 2004
Mood: Come on spring!!!
filters

They are standard replacement filters. i.e need to fit in standard airtubes or carbon ones designed to take standard filters!
Quote+Reply
  #5  
Old 20-Mar-2006, 12:56
Ray's Avatar
Ray Ray is offline
Registered Forum User
Ducati Corse
 
Posts: 3,555
Join Date: May 2001
Mood: R U thinking what I'm thinking?......Oh dear!
"In tube" filters every time for me. At a push use the type that cover the inlets into the airbox on the tube side.

Anything that goes inside the airbox reduces its volume or reduces the positive effects of the airbox size/shape.

If you're a regular gravel trap visitor It might make sense to use a filter over the trumpets/in the airbox to stop gravel getting in to the inlets when you knock the tank off!!

You might get some of the loses from an undetank setup back with a dyno session/ FIM CHIP or PCIII but in my expererience you won't get the throttle response you get with in tube filters.

Ray.
Quote+Reply
  #6  
Old 20-Mar-2006, 21:45
MrWestys748 MrWestys748 is offline
Registered Forum User
Montjuic
 
Posts: 66
Join Date: Jul 2004
Do you leave the grill's covering the air vents in the nose fairing or remove them...?
Quote+Reply
  #7  
Old 20-Mar-2006, 22:17
keefer's Avatar
keefer keefer is offline
Registered Forum User
Ducati Meccanica
 
Posts: 2,518
Join Date: Jul 2004
Mood: Found a CR250. Let the bone braking begin
i remove them
Quote+Reply
  #8  
Old 21-Mar-2006, 08:34
Tantrum992's Avatar
Tantrum992 Tantrum992 is offline
Registered Forum User
Mille
 
Posts: 309
Join Date: Feb 2005
Ive taken a look under the tank of my 748 and couldnt see any sighn of an air filter, so i guess that means there in the air tubes as the above post talks about, how do i get to them and how often should they be changed?
any recomendations on what type to use...

Cheers Simon
Quote+Reply
  #9  
Old 21-Mar-2006, 09:25
keefer's Avatar
keefer keefer is offline
Registered Forum User
Ducati Meccanica
 
Posts: 2,518
Join Date: Jul 2004
Mood: Found a CR250. Let the bone braking begin
have you got carbon or original
Quote+Reply
  #10  
Old 21-Mar-2006, 11:33
antonye's Avatar
DSC Member antonye antonye is offline
Administrator
Webteam
MotoGP God
Bikes: 748S, HM1100S, V4SP, Was: DD-A #111
 
Posts: 13,054
Join Date: Feb 2002
Mood: Passion Killer
Original filters go inside the plastic air tubes that run inside the fairing to the airbox under the tank. You need to remove the fairing and tank, then you can unclip the air tubes from inside the airbox and remove them. Then it's about 7 or 8 screws to remove and the airbox will split in half so you get access to the filters.

If you have carbon air tubes, some of them have the runners inside to hold the oem filters in place. Many of them don't though, so you need to use a different type of filter like the inner-airbox ones.

Pipercross do excellent replacement filters for the air tubes. They're a two-layer "washable" foam that filters better than the paper oem ones. You can clean and re-oil them (this traps the dirt) so once you've bought them you don't need to buy any more, whereas oem ones get replaced every 2 years as part of the major service. Pipercross filters are about £20 from most Pipercross dealers, or Demon-Tweeks online. MPX-038 is the part number I think.
Quote+Reply
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 18:15.