Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Sport Touring: ST4 / ST3 / ST2 > Co2

[pcn1]

I am about to have a go at tuning my st2. Having read up on the fuel injection system on Sigma's web site and FIM's I have borrowed a vacuum gauge set and a Co2 tester. What is the correct Co2 setting when the bikes left the factory ?
Any tip's before I get going ?

Thanks

[rockhopper]

You need to be able to measure CO and Lambda as well to do it right.

[nelly]

It's the CO you need to measure, not Co2. Carbon monoxide vs. Carbon Dioxide.
The setting from the factory is a very "green" <1.5%, for best performance you'll want about 4% - 4.5%.
Make sure you measure from the take off points in the header pipes, as taking a sample from the end cans, from experience, tends to cloud the readings.