Quote:
Originally posted by mark749s have been out on the bike today, the handling is completely different, you would not think it was the same bike. That is with 4 lines showing i.e. 16mm poking thro' I had already set the sag to 35/30 front and back am very pleased with it now. my only regret is that i did not use a chain block to suport the front end and that i did not check the tightness uf the centre clam on the triple clamp you live and learn thanks for the help Mark |
it makes a lot of difference, the front end turns a lot easier and feels better. rear ride height is equally as important, I made a tool for this, theres a thread somewhere on site with a picture dseered took, it weren't the most complicated of things and cost nothing to make.
never sen a loose centre clmap bolt, wil check mine. I usually only do one leg at a time anyway, oops should have said that in my previous post , doh