Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Torque Settings

[andyc]

This is maybe the most known question amongst you lot but what are the torque settings for the 2 bolts on the swing arm that hold the chain adjuster on a 748, i have looked in the service manual and the only bolt decription that bears any resembalance to it is called chain eccentric adjustment screw set at 28 to 33 nm.

Thanks in advance.

[weeksy2]

that's the one mate... approx 31Nm.

[andyc]

Thanks, just wanted confirmation as i didn't relish the idea of bits flinging off!!!