Ducati Sporting Club
Home Calendar Gallery Membership Online Shop DSC Blogs Extras
Go Back   Ducati Sporting Club > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748
Reload this Page Clutch - Slave Cylinder question.
Forum Home Register FAQ Search Forum Recent Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-Jun-2019, 08:30 AM
chris-748s chris-748s is offline
Registered Forum User
 
Posts: 14
Join Date: Jun 2003
Clutch - Slave Cylinder question.

Quick question regarding a clutch issue on my 2001 748S.

Clutch lever became soft and difficult to change gear, then lever went straight back to the bar.

I bled out all the old grey clutch fluid but no better. (lever still goes back to the bar)

So I'm thinking slave cylinder - take it off and then here's the question.

The clutch lever is now rock solid although there is no movement at the slave . (if I put a drill bit in the hole it does not move when operating the lever)

Put it back on the bike and the lever goes back to the bar again.

I'm thinking the slave is 'locked/siezed' or the seals have gone and fluid s just rushing past them.

Any opinions on other possible issues before I have to go shopping for a new slave cylinder?
Reply With Quote
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2019, Jelsoft Enterprises Ltd. - © Ducati Sporting Club - All times are GMT +1. The time now is 04:38 PM.