Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > General Motorcycles only > Fork clamp diameter for monster damper mount

[Lee1980]

Just got Rattler's Ohlins steering damper and it came with a fork clamp you have to slip over fork thought it be easier than it looks

I have seen split clamps for £15 but whats the diameter of fork where clamp goes i get 54mm measuring the one piece clamp with a ruler

Anyone know it for sure before i order one

[Rattler]

Is an easy job to remove the top yoke, slide the clamp down the fork leg and refit the yoke. Its a 20 min job really.

As you're only taking off the top yoke (3 bolts) there's no danger of upsetting any of the forks etc, as the bottom yoke keeps them in place.

Just bring it to the first DD race and I'll fit it for you.

Tim

[Edited on 21-1-2006 by Rattler]

[Lee1980]

Thanks Tim

Just looks like to me it wont come up that high over the fork adjusters with out removing the bars and clocks etc maybe im reading to much into it.

I undid the 3 bolts but then thought nah it aint gonna come up easy

when and where is the first dd round?