You can make the Ricambi or QB units fit a 888 strada subframe - I did it in my racebike! I ditched the grabhandles and cut off the sticky-up posts that locate the strada rear seat panels. I also had to make up small brackets to allow me to mount onto the oe wellnuts on the bottom rail near the exhaust hangers. I also used a couple of bits of pipe lagging in strategic locations to keep everything in place. I was going to do the same thing on my '92 851 strada but find the underseat storage area more useful than looking like an SP..... Paul Paul 15th year in DD #68 and getting slower by the year 1199, SS800 & 620SSie DD racer |