Answer - not quite!
Went out to fit my new stainless springs,screws and alloy caps to the Hyper.I fitted the first spring/cap,only to find the spring was coilbound when the screw was fully home.
I checked the cap and spring with the origional items and found the springs and caps were differant.
I double checked against my '05 999S and the wifes '02 M900ie,.....the size and length were identical.
So it looks like any new model from '07 onwards uses differant springs and caps.A quick look at the parts book confirms the differant numbers.
The Hyper and Monster 1100 spring cap is about 4mm deeper.
The 1098 uses a differant number again,....so it will be differant to the Hyper and the older bikes.My guess is the 'throw' of the latest generation master cylinders is differant.
Just summat to think about if you are thinking of tarting up the dry clutch on your 2007< bike.
Looks like the missus monster is going to get some nice new stainless clutch springs and blue caps.