| There was someone on ebay selling an adapter for the double banjo bolt to avoid the clearance issue. It was basically a threaded tube with a banjo hole at one end. You used the adapter with the single banjo into the m/c, which then gave you a right-angle turn on the inlet (the adapter now sits parallel below the m/c). You screwed the double banjo into the adapter so you kept the single height banjo clearance but could fit a double banjo and brake lines. The adapter was less than £20 I think, but I can't find them with a quick search! Typical!
As for the reservoir hose, just get a metre off ebay, usually about £5-£6 per metre for Brembo stuff. |