Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Fitting C/F Airbox & JHP Filters

[rcgbob44]

For those who are contemplating fitting a new airbox and the JHP undertank filters, here are a few piccy`s

B4 I started to pull things off.

[rcgbob44]

here`s the old filter and injection removed.

[rcgbob44]

This is the new C/F airbox with the JHP filter mounts installed.

[rcgbob44]

here`s the airbox fitted with the injectors installed but without the filters.

[rcgbob44]

oops forgot piccy

[rcgbob44]

This is with everything done and fitted.

[rcgbob44]

here`s one of the injectors - size is important!!!!

[rcgbob44]

Here`s a side view with the box fitted etc.

[rcgbob44]

Last but not least, the lady with her clothes back on.

[andyb]

Almost worth leaving your tank off to look and stare......


When i did this, i re routed the rubber fuel pipe between the two inlet tracks, putting the T piece to the right side.
I then fed the front injector pipe underneath the right hand filter, and up to the front. (Using new hose)
This cleared the underneath of the fuel tank for precious air space.