call Nelly at Cornerspeed on 01623 758877, he probably has a few laying round, it may be worth getting a set of stainless steel bolts, springs and caps as they are not as soft as the original bits ...
Yes its the bolt head thats buggered, I will be replacing all with stainless but for now I just want to get the clutch plates cleaned, so before I drill out the old bolt I just want to get another to replace it with so I can still ride it after cleaning out the clutch.
I'll see how I get on today, my ducati dealer "may" have one in yet just thought I'd see if there was a size available aftermarket that I could get from an industrial supplier over here.
As I'm using the bike as transport its not like I can take one with me as an example.
748mart, thanks for the offer, very generous. I'll see how I get on today.
Mood: Must fix Superlight... Must fix Superlight...
The thread will be M6 and the length is around 20-25mm (measure the length of one of the others). There's nothing special about them. You should be able to buy one anywhere.