Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Supersports: SS / SuperSport / Supersport 950 > Rear brake caliper

[Zimbo]

Does anyone know if the rear caliper off a 748/9x6 will fit a carb Supersport ? (not underslung).

[dukess1999]

I'm pretty sure they're identical; will check tonight.

[Iconic944ss]

Seems likely they will - here is some info from the www.pdq1.com website:

Goldline Rear - 20.5161.42 - £51.71 per caliper
Mounting Type: Lug 84mm
Body Type : 2 piece cast aluminium
Piston Type: 2x32mm aluminium
Inc Brake Pads: Yes, 107.2686.41
Typical fitments - Ducati pre 2001 plus many other Italian models.

Goldline Rear - 20.6950.51 - £73.80 per caliper
Mounting Type: Lug 84mm
Body Type : 2 piece cast aluminium
Piston Type: 2x32mm aluminium
Inc Brake Pads: Yes, 107.6949.10
Typical fitments - Aprilia 2000 on also modern Ducati.

[Zimbo]

OK, thanks chaps. I had a bit of rattle coming from the caliper area when I pushed the bike to and fro but now realise it's not the pads rattling around excessively (the hole on my caliper is enlarged so I use a split pin, which means the pads are looser). The rattling was a sprocket carrier pin inside the wheel hub - it had sheared off. New thread...