Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Is mine like yours? (Belt tension Tool) (Pic)

[Ericsson]

I couldn't resist buying this, but I don't know if it will work at all.

Anyone with the "real thing" that could compare with theirs and spot any differences?

Diameter of the rollers: ~15mm, length ~34mm
Text on front: 0417 3790KZ, text on back 005030.

[nelly]

Almost.............you'll need to get some sleeves made for the rollers to take them to 17mm diameter. It'll then read correctly in line with the Ducati manual.

[Ericsson]

Thanks for the info,

The rollers seem to be a bit long, do you know the length of the rollers on the "ducati tool"?

Cheers,
/Uffe

[nelly]

20mm. Looking at the picture I'm guessing yours are 34mm long? If they are, you'll need to get them shortened I guess as you won't get the tool on the belt because the back plate will be in the way.

[Ericsson]

Big thanks Nelly, great info!

I'll have some new rollers made diam 17mm length 20mm

And have the "wedge" (??) shortened a bit.

Anyway, pretty good for £20

/Uffe