Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 851 / 888 > Carbon Exhaust Hangers

[Rob B]

I have recently acquired these hangers, but as you can see, they have been modified (extra mounting holes drilled) by the previous owner. In this state, they are nigh on unusable for a standard application. I am going to look into getting some replacements manufactured, both in ally and carbon. As there seems to be a flurry of interest in exhaust hangers at the moment, and this type don't seem to be available anywhere else, I thought I'd ask if anyone else might be interested in a set. If so, what would you be prepared to pay so I know if it's possible (or how many sets I'd need to make) to recover the tooling cost for the carbon versions? Ping me off list if you don't want to discuss price on-line.

Rgds, Rob

[CL955]

Rob

I'd be interested in a carbon pair to suit a '91 SP (I think that the earlier bikes had a slightly different exhaust hanger).

When these were officially available, I think they were £60-80 each.

I've seen some poor reproductions on the market that have been cheap, thin and poorly finished.

Regards
charles

[Rob B]

Charles,

I am not sure what you are asking for re: a 91 SP. If I make any, they'll be as pictured less the extra holes.

Was that £60 to £80 per side? Ouch!

rgds, Rob

[loony888]

o.k rob, i'll DEFINITELY have a pair of those. your sp4 pictured?
if they are on a sp4 they will fit sp4, sps, sp5. (just for clarification) and of course, corsa models from 93/94.
i'm in oz so if you're willing to post them to me when done i'm as keen as mustard!!

[Rob B]

I think the SP5 has wider hole spacing... my carbon buddy is still skiing in Finland so I haven't made much (any) progress assesing the pricing/viability of manufacture as yet.

Watch this space.

Rgds, Rob

P.S. No SP4 - Just a humble Strada

[loony888]

no, the sp3 is definitely different, but the sp4 and 5 are the same.

[Jools]

I'll have some, but I hope they're not £60-80 a side

Then all I'll need are the high level cans to hang on them...and then the rearsets...and then...DOH...this is getting expensive again !!!

[loony888]

Originally posted by Rob B

P.S. No SP4 - Just a humble Strada

uh huh, a humble strada with 431's and g's oh and lets see......A 996!!!

[loony888]

bump

[Charlie]

Originally posted by loony888
no, the sp3 is definitely different, but the sp4 and 5 are the same.

Am pretty sure the hanger holes on the SP5 alloy sub frame are spaced further apart?