Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Newbie Help Required

[J1220]

Hi guys/gaals, Im new on this forum, I have had a 748S (Yellow) for approx 2 years but did not know of this place until I have realised that my servicing cost are too expensive and need to some spanner work my self.

I was looking at getting myself some tools, to start off with front and rear wheel nut socket. I believe sizes are 27mm front 46mm rear (please cooerct me if i'm wrong). I would like to ask if this would fit (please see link) rather than buying what people are selling as "Ducati rear wheel nut socket" and 3 times as much in cost.

http://cgi.ebay.co.uk/DRAPER-47mm-Bi...QQcmdZViewItem

Many thanks

[skidlids]

Front spindle is a 28mm (not 27mm) , rear wheel side as you say is 46mm and the sprocket side if I remember correctly is 41mm (easy enough for me to check when I get home from work)

some of the tool stores at the bigger auto jumbles sell them.

[skidlids]

http://cgi.ebay.co.uk/46mm-socket-fo...QQcmdZViewItem

[J1220]

Thanks mate..is the front one deffo 28mm?

[doogalman]

Yep, 28mm.

[TopiToo]

Hello J1220

welcome . . . plenty of people here to give advice

where you based?

TopiToo