Fork seals

Tonio600 · 09-Sep-2006, 14:05

How do you take them off?

I've tried with my best flat screwdriver, only managed to slightly mark the fork tube

The seal doesn't want to move at all...

khushy · 09-Sep-2006, 14:59

you need a special tool to take em out AND another to put em back in again - should really try and avoid the srewdriver - as that bit of the fork tube sits on the seal - I also think that the seal has a metal ring running through it.

Stand to be corrected!!

Khushy

nelly · 09-Sep-2006, 14:59

Have you picked out the wire retaining ring? It sits in a groove just above the seal.

Tonio600 · 09-Sep-2006, 15:14

Hi guys,

Quote:

Originally Posted by nelly

Have you picked out the wire retaining ring? It sits in a groove just above the seal.

Yes Nelly, that one came off easily with a small flat screwdriver. Now there is only the seal left I think.

No way I can take it off without the special tools?

domski · 09-Sep-2006, 15:29

Have you tried an angle grinder?

AK · 09-Sep-2006, 17:32

bring them over mate am around.

can help you do them or whatever

Tonio600 · 10-Sep-2006, 02:15

What you doing tomorrow pm Doc?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

09-Sep-2006, 14:05	#1
Tonio600 Registered Forum User Ducati in my Blood Posts: 4,379 Join Date: Dec 2004 Location: Dorking, Surrey. Mood: What a wonderful world. Fork seals How do you take them off? I've tried with my best flat screwdriver, only managed to slightly mark the fork tube The seal doesn't want to move at all... Reply

09-Sep-2006, 14:59	#2
khushy Registered Forum User 500SD Posts: 516 Join Date: Mar 2005 Location: Glastonbury I think . . . you need a special tool to take em out AND another to put em back in again - should really try and avoid the srewdriver - as that bit of the fork tube sits on the seal - I also think that the seal has a metal ring running through it. Stand to be corrected!! Khushy Reply

09-Sep-2006, 14:59	#3
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) Have you picked out the wire retaining ring? It sits in a groove just above the seal. Reply

09-Sep-2006, 15:29	#5
domski DSC Club Member WSB Hero Posts: 9,994 Join Date: Jan 2005 Location: Devon Have you tried an angle grinder? Reply

09-Sep-2006, 17:32	#6
AK DSC Club Member BSB Star Posts: 6,367 Join Date: Jan 2003 Location: the garage Mood: www.knightroadraceteam.co.uk bring them over mate am around. can help you do them or whatever http://www.snellmotorcycles.com/ http://www.knightroadraceteam.co.uk/ Reply

10-Sep-2006, 02:15	#7
Tonio600 Registered Forum User Ducati in my Blood Posts: 4,379 Join Date: Dec 2004 Location: Dorking, Surrey. Mood: What a wonderful world. What you doing tomorrow pm Doc? Reply